skip to main text

Connect Using WPS

  1. Make sure that the button on the wireless router is ready to be pressed.

  2. Press and hold the Wi-Fi button (A) on the printer until the ON lamp (B) flashes.

    figure: Press and hold the Wi-Fi button and the ON lamp flashes; press the Black button, then press the Wi-Fi button

  3. Press Black button (C) and then Wi-Fi button (A); make sure Wi-Fi lamp (D) flashes quickly and ON lamp is lit as shown in illustration below, and then press and hold button on wireless router within 2 minutes.

    figure: The Wi-Fi lamp flashes quickly and the ON lamp lights up

  4. Make sure that the Wi-Fi lamp and the ON lamp are lit.

    figure: The Wi-Fi lamp and the ON lamp lights up

    If the Alarm lamp lights up, refer to "Troubleshooting."

The network connection setup is now complete.